Queens · Astoria to Rockaway
Hardwood floor refinishing & sanding in Queens
Tired, scratched or discolored hardwood in Queens can usually be brought back with a full sand, optional stain and a fresh finish. As a licensed and insured flooring company with 30+ years in the industry, we act as your flooring contractor from start to finish. Call (718) 690-3435.
Hardwood floor refinishing for Queens walk-ups, two-family homes and beach houses
Queens covers real geography, from Astoria walk-ups to Rockaway Beach houses, and one licensed crew covers it from Brooklyn. Rockaway brings coastal humidity and salt air, which is why moisture checks come before any refinishing decision near the water. Scheduling accounts for Queens traffic so the crew arrives when promised. Refinishing jobs come up across Astoria, Forest Hills, Flushing, Jackson Heights, Ridgewood, Jamaica and Rockaway Beach. Our Queens flooring page covers what else we do in Queens besides refinishing.
Our sanding and refinishing process
Sand
In Queens, the old finish plus about 1/32 inch of wood comes off with sanders that have inbuilt vacuums.
Repair
Wood filler goes where sanding alone will not fix gaps, and failed boards can be replaced first.
Stain
Match existing, choose new or leave natural, approved from test spots in your own light. Beach houses in Rockaway see sand and moisture at the door.
Dust control and living at home
Across Queens, many homeowners stay during the job when work goes room by room and the finish is low-odor water-based. With water-based polyurethane, coats are about an hour apart and foot traffic is typically fine within 24 hours. Oil-based needs about 12 hours between coats and 24 to 48 hours before traffic. Queens traffic is built into the schedule so arrival times hold.
Choosing a color for your floor
For Queens walk-ups, two-family homes and beach houses, medium browns fit classic rooms, while dark walnut and ebony give high contrast with white trim. We work with Minwax and Bona finishes, and the estimate form lists Bona DriFast and Minwax color options. Custom matches are tested next to a stair tread, threshold or cabinet face until they agree in daylight and lamp light. Ridgewood and Jackson Heights buildings share halls, so protection matters. Read more on the main sanding and refinishing page.
Photos from our work
Our gallery includes a real Rockaway Beach refinish, done with coastal humidity in mind. Full gallery →
What affects the cost
The area being sanded and the finish plan, natural or stained, sheen and number of coats, are the main factors on a refinish. Access, stairs and hidden repairs under the old floor can also change the plan. If you want a first look, get an instant preliminary estimate.
Frequently asked questions
Refinish or replace?
Refinish when boards are sound and damage is mostly surface wear or local. Replace when boards are rotten, cupped beyond repair or too thin to sand.
Do you test stain colors first?
Yes. We sand small test spots, apply candidate stains and let you approve in the room’s real light before the full floor is stained.
Which Queens neighborhoods do you serve?
For refinishing, Astoria, Forest Hills, Flushing, Jackson Heights, Ridgewood, Jamaica and Rockaway Beach are all in our area. Confirm your street for refinishing when you call (718) 690-3435.
Who do I call about refinishing in Queens?
Call (718) 690-3435. Refinishing in Queens is run from our Brooklyn shop at 229 Sumter St. The Instant Preliminary Estimate gives a planning number for refinishing before a free on-site measure.
See what our customers say